As an appreciation for your support, we encourage you to take advantage of additional savings on a variety of world-class aftermarket brands that we offer for your Tesla.
Thank you for your support!
-Danny
]]>The same weight cutting recipe featured on VS-5RS can be found on SM-10RS also. Side milled spoke cutouts removes any excess material that doesn’t add to structural strength.
Any excess material is drilled out and shaved off on the backside as well. The bore is hub-centric to ALL variants of Tesla Model 3 and Model Y, so no hub rings are necessary - a true plug & play affair.
Tesla center cap compatibly for an OEM+ look. Black APEX center caps are include.
Paintless knurled bead seating prevents tire slippage under hard acceleration and cornering. Excellent feature for hard accelerating nature of these cars.
SM-10RS 19x9.5 +29 weighs in at 19.6lbs. Along with VS-5RS, these are simply the lightest plug & play wheels offered for these cars. If cutting rotational mass is your goal, look no further.
Satin Black SM-10RS
Satin Bronze SM-10RS
Anthracite SM-10RS
Brushed Clear SM-10RS
Shown below is SM-10RS in Satin Bronze on one of our client’s Model 3 Performance.
SM-10RS are now in-stock and ready to ship!
Browse our Tesla Motors Club page for latest updates with deals and galleries featuring our client's vehicles.
MODEL+ is an authorized APEX Wheels Stockist. Exclusively offering and supporting authentic APEX wheels and accessories.
Shipping Worldwide
Feel free to leave us message here if you have any questions!
]]>Available in Machine Black. Choose between 35mm short length & 50mm tall length.
Special machined side slots for lightness.
No special key needed (Although seems like its needed) Thread lugs and 19mm Hex socket for 14mm Thread lugs. 26.5 mm overall length
Tested beyond OEM criteria for repeated installation removal / torque handling and retention. Don’t be afraid to use speed sockets.
Open ended design for extended racing studs.
Fits ALL Tesla Model 3 & Model Y variants.
Shipping Worldwide 🌎
Please message or email us at io@modelplusstudio.com for any questions or inquiries!
This technique drastically reduces rejection rates, significantly improving delivery times. Vorsteiner uses a combination of unidirectional, 1x1, and 2x2 weave carbon fiber to keep the weight to a minimum while providing optimum strength and rigidity. The vacuum-formed technology used in our aerodynamic parts draw out excess resin which ultimately draws out excess weight without decreasing structural rigidity. This process provides a much tighter control over the fit and finish giving you the piece of mind that the part will perfectly match the factory shut lines and contours.
MODEL+ is an authorized Vorsteiner dealer. Offering and supporting authentic Vorsteiner wheels, aero, and accessories.
Feel free to contact us for pricing & availability, or if you have any questions! io@modelplusstudio.com
Shipping Worldwide 🌎
As a premium feature, Model S and X have built in air suspension from factory. So the easiest way to lower these vehicles is to "trick" the system into thinking the car is set at certain ride height using adjustable lowering links.
N2itive has some of the best in the business. With TARTAN RSX-3 clipless and maintenance free links, you set them once and you’re done. The RSX-3 precision Vernier scale makes adjustment super easy and fast! There is no need to remove the links and go back and re-adjust with a caliper as with most adjustable links. When quality, craftsmanship and adjustability matter, our performance TARTAN RSX-2 lowering links are the only choice. 6-year to lifetime warranty included.
TARTAN SX-P2 adjustable rear camber arms will help get alignment in check. Even if have no intentions on lowering your Model S or X, these arms will prevent your rear tires from wearing prematurely due to bad factory alignment.
Now you can have the ideal alignment for both track or street without the need to visit the alignment shop every time you want to make a change. With our new multi-alignment kit that comes standard and preinstalled on the black version, you now have the ability to recall any alignment setting you choose. You can create one setting for the track, one for the drag strip and another for street. Make your adjustments on site and change your settings back to your street setting when it’s time to go home. The multi-alignment kit also helps with the installation process.
Lastly, N2itive offers the high quality and precision treatment for Model 3 and Model Y applications with adjustable forged rear camber and toe arms.
Why Choose N2itive
At N2itive we give you the highest quality parts and craftsmanship at a reasonable price. Everything we create is meticulously well thought-out, precision engineered and FEA and real-world tested! All of our components are custom made. Nothing is off the shelf. Take our weather sealed spherical bushings for instance… made with high strength steel that’s been electroless nickel plated for amazing wear and corrosion resistance. Each bushing incorporates a Teflon infused Delrin liner for a lifetime of trouble-free, maintenance-free use. You can count on us to only give you the best with all our parts and we back that up with a 6-year to lifetime hassle-free warranty to the original purchaser. Our products are the strongest, safest and most durable aftermarket Tesla parts you can buy, guaranteed! Not to mention, they look incredible.
Shipping Worldwide 🌎
Please message or email us at io@modelplusstudio.com for any questions or inquiries!
Not too fond with paying a premium for the heavy 21" Arachnid wheel package from Tesla, Will reached out looking to replace his factory 19" setup with a lightweight 10-spoke design wheel from the aftermarket.
After browsing through BC Forged's extensive wheel catalog, we concluded on the EH173 in Matte Black.
With no intentions of lowering his daily driven Model S, we went with a "Street-Moderate" spec.
Around 23/24lbs respectively for a 21x9.5/21x10.5 fully-forged setup, this is significant unsprung weights savings on each corner of the car.
BC Forged EH173
•21x9.5 & 21x10.5 Staggered
•Matte Black
•Medium Concavity
•Plug & Play
Supporting Accessories
•Project Kics Bull Lock Lug Nuts
•Tesla Bluetooth TPMS Sensors (Black)
•265/35/21 & 295/30/21 Falken Azenis FK510 Tires
---
MODEL+ is an authorized BC Forged Dealer. Exclusively offering and supporting authentic BC Forged wheels and accessories.
Please message or email us at io@modelplusstudio.com for any questions or inquiries!
Shipping Worldwide 🌎
]]>
Our client Christian missed the quieter and softer ride comfort offered by the OEM 19” factory setup. Most would consider 19” small on a big car like the Model S, so the only proper way to pull this off is making sure the stance and fitment is dialed in.
Referencing an Aston Martin in a similar color scheme, we decided to go with BC Forged’s RT50 monoblock wheel to express an “elevated motorsport” vibe.
Due to the bespoke nature of BC Forged wheels, we opted for the following features to make this setup clean and unique.
The end result is a daily-friendly look, with a hint of motorsport inspiration from the wheel’s flat face profile and deep lug pockets. Not to mention these 19” wheels are much lighter than the factory set. 👌
BC Forged RT50
•19x10 Square
•Gloss Stone Finish
•Flat Face
•Deep Lug Pockets
•"Forged" Lettering Delete
•Plug & Play
Supporting Accessories
•N2itive Lowering Links
•N2itive Rear Camber Arms
•Project Kics Monolith T1/07 (Glorious Black)
•Tesla Bluetooth TPMS Sensors (Black)
•275/40/19 Pirelli P Zero Tires
MODEL+ is an authorized BC Forged dealer. Exclusively offering and supporting authentic BC Forged wheels and accessories.
Please reach out for any questions or inquires.
Shipping Worldwide 🌎
We now offer Whiteline's sway bar kit and suspension components for Model 3 & Model Y.
Engineered to 'Activate More Grip', sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 20mm 3 point adjustable sway bar = more grip = better handling = outright performance - it's the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.
Whiteline Front Sway Bar - 20mm 3 Point Adjustable
Whiteline Rear Sway Bar - 20mm 3 Point Adjustable
Whiteline Adjustable End Links
In addition to the sway bar kit, Whiteline rear upper and lower control arms are available to keep alignment in check!
Whiteline heavy duty control arms provides on car adjustability of camber and toe alignment. This results in improved traction, increased cornering grip and better tyre life - ultimately improving overall performance
Whiteline Rear Camber Arms for Model 3/Y
Whiteline Rear Toe Arms for Model 3/Y
Whiteline Rear Upper Traction Arms for Model 3/Y
Whiteline Rear Trailing Arms for Model 3/Y
]]>
Spacers Guide - For more configurations, please visit our Tesla factory wheels spacers guide.
Contact us for any compatibility and fitment related questions. We're happy to assist!
]]>
Spacers Guide - For more configurations, please visit our Tesla factory wheels spacers guide.
Contact us for any compatibility and fitment related questions. We're happy to assist!
]]>Presented here in Satin Bronze color finish.
Weight cutting measures can be found in between spokes!
Paintless knurled bead seating to prevent tires from slipping while driving hard at the track.
19.6lbs is the final weigh-in for 20x9 +34 spec. Currently the lightest 20x9 direct bolt-on wheel you can purchase for your Model 3 or Model Y!
Vorsteiner's carbon fiber parts are produced using a state-of-the-art aerospace autoclave system. This provides unsurpassed rigidity, strength and finish to our aerodynamic components. We distinguish ourselves by utilizing a resin pre-impregnated, vacuum-formed carbon fiber material that results in a 20% - 30% stiffer and stronger product than an equivalent wet-lay up product.
This technique drastically reduces rejection rates, significantly improving delivery times. Vorsteiner uses a combination of unidirectional, 1x1, and 2x2 weave carbon fiber to keep the weight to a minimum while providing optimum strength and rigidity. The vacuum-formed technology used in our aerodynamic parts draw out excess resin which ultimately draws out excess weight without decreasing structural rigidity. This process provides a much tighter control over the fit and finish giving you the piece of mind that the part will perfectly match the factory shut lines and contours.
This aero kit is compatible with ALL Model Y variants and can be purchased as a full kit or a la carte. All items are intuitively listed their respective product page.
Our Canadian client Jonathan initially reached out referencing an Audi RS6 on BC Forged EH185 wheels that he really admired.
To help him achieve a similar look on his 2022 Model S Long Range, a bit of in-house consulting and some backend help from Cole @ BC Forged were required to produce this menacing stance on Jon’s refreshed Model S!
BC Forged EH185
•Monoblock Fully-Forged
•Gloss Black
•Deep Concavity
•21x9.5 & 21x10.5 Staggered (~26/27lbs)
•265/35 & 295/30 Michelin Pilot Sport 4S
•Direct Plug & Play
Supporting Accessories
•N2itive Lowering Links
•Project Kics Bull Lock Lug Nuts (Black)
•Tesla Bluetooth TPMS Sensors (Black)
MODEL+ is an authorized BC Forged dealer. Exclusively offering and supporting authentic BC Forged wheels and accessories.
Shipping Worldwide 🌎
Please reach out for any questions or ordering details 📥
As demonstrated by our client, these Advan GT Beyonds in Machining & Racing Hyper Black pair exceptionally well with Model Y. This will basically be plug & play as we will be including appropriately sized hub-centric rings at no additional cost. Lug holes are M14 compatible from factory.
This 20x10 +30 spec was specifically chosen to be compatible and flush-fitment with any Tesla Model Y. Finished in Advan's gorgeous Machining & Racing Hyper Black color finish as shown on our client's Model Y Performance.
Purchase - Advan GT Beyond in Machine & Racing Hyper Black for Model Y
MODEL+ is an authorized Advan Racing / Yokohama Wheel dealer. Exclusively offering and supporting authentic Advan wheels and accessories.
Feel free to contact us if you have any questions!
]]>BC Forged Monoblock in Brushed Bronze for our client Tuan's 2022 Model S Plaid.
Tuan wanted to push fitment as close to the definition of "flush" as possible. We finalized on 21x10.5 square to give him the flexibility to run 285/30/21 tires all-around.
Lowered via N2itive lowering links has been accounted for.
Tuan wanted to keep this setup rotatable between front and rear.
He added a 15mm spacer in the rear to essentially get perfect fitment front and rear. This spacer compatibility is accommodated during the consultation phase.
Production on Brushed Bronze RZ21 with deep concavity profile was finished.
Wheels - 21" BC Forged RZ21
Suspension - N2itive Lowering Links
Etc. - Tesla Bluetooth TPMS Sensors (Black)
Please message or email us at io@modelplusstudio.com for any questions or inquiries!
]]>
Spacers Guide - For more configurations, please visit our Tesla factory wheels spacers guide.
Contact us for any compatibility and fitment related questions. We're happy to assist!
]]>Video Walkaround
Spacers Guide - For more configurations, please visit our Tesla factory wheels spacers guide.
Contact us for any compatibility and fitment related questions. We're happy to assist!
]]>22" BC Forged Modular MLE72 for our Canadian client Hong's 2022 Model X Plaid.
Hong reached out wanting to upsize from Tesla 20" Cyberstream wheels to a classically styled 22" setup. Jumping two sizes typically means adding more weight, you would think...
For his MX Plaid, we finalized on a low-offset staggered 22x9.5 and 22x10.5 configuration for a street flush stance. Matte black was selected for the lips, centers and barrels. Contrasted by exposed titanium hardware for a bit of visual pop.
"This 22” wheels/tires combo ended up being 5lbs lighter than the factory 20" Cyberstream wheels/tires combo! 👌" This was why a fully-forged modular setup by BC Forged was chosen for the task.
Wheels - 22" BC Forged MLE72
Tires - Good Year Eagle F1 Asymmetric 3 - 265/35/22 & 285/35/22
Etc. - Tesla Bluetooth TPMS Sensors (Black)
We have been commissioning more revised Model S/X Long Range & Plaid wheel sets recently. We have extensive knowledge in fitment for these platforms. Please message or email us at io@modelplusstudio.com for any questions or inquiries!
]]>BC Forged Modular HCS34 in Brushed Black with Polished Lips for our client Nick's 2023 Model 3 Performance.
Nick wanted to do a 20" aggressive-flush fitment with daily usability in mind. Coming from a bagged Mercedes-Benz C63 AMG as shown below, this man was no stranger to any of this.
For his M3P, we went back and forth before finalizing on a 20x10 square setup. The important factor here was to select an offset that would be flush to fender for both front and rear. It would also need to clear the front suspension arm.
MountainPass Comfort Coilovers, along with slightly stretched 265/30/20 tires brought the entire stance together.
HCS34 is such a unique design offered by BC Forged. When Nick came across this wheel model, all bets were off!
Between each spoke features a window cutout that exposes the lip ever so slightly. You can have a field day choosing the lip color to play "peek-a-boo" with your HCS34s!
Project Kics Monolith T1/07 Lug Nuts in Glorious Black was selected to match perfectly with the Brushed Black finish on Nick's HCS34.
Wheels - 20" BC Forged HCS34
Suspension - MountainPass Performance Comfort Coilovers
Lug Nuts - Project Kics Monolith T1/07 Lug Nuts in Glorious Black
Etc. - Tesla Bluetooth TPMS Sensors (Black)
Please message or email us at io@modelplusstudio.com for any questions or inquiries!
]]>Video Walkaround
Spacers Guide - For more configurations, please visit our Tesla factory wheels spacers guide.
Contact us for any compatibility and fitment related questions. We're happy to assist!
]]>Video Walkaround
Spacers Guide - For more configurations, please visit our Tesla factory wheels spacers guide.
Contact us for any compatibility and fitment related questions. We're happy to assist!
]]>
Video Walkaround
Spacers Guide - For more configurations, please visit our Tesla factory wheels spacers guide.
Contact us for any compatibility and fitment related questions. We're happy to assist!
]]>
Video Walkaround
Spacers Guide - For more configurations, please visit our Tesla factory wheels spacers guide.
Contact us for any compatibility and fitment related questions. We're happy to assist!
]]>
Spacers Guide - For more configurations, please visit our Tesla factory wheels spacers guide.
Contact us for any compatibility and fitment related questions. We're happy to assist!
]]>NOVITEC has swept Tesla drivers around the globe off their feet with exclusive refinement ranges for the Tesla 3, S and X models. Now there is also a custom sport range for the Model Y! NOVITEC upgrades the bodywork of the electric SUV with sporty yet elegant NOVITEC naked-carbon aerodynamic-enhancement components. The thrilling looks are rounded off by tailor-made NOVITEC hi-tech forged wheels with a diameter of 22 inches. They were developed in cooperation with Vossen. The Model Y can be given a sportier setup with a height-adjustable coilover suspension, which also allows lowering the ride height by 40 millimeters. In addition, NOVITEC creates exquisite interiors in any desired color and with individual upholstery designs by customer request.
Presented here in Satin Black color finish.
Weight cutting measures can be found in between spokes!
The hub-pockets are drilled deep to reduce weight also. And of course, to make this a true P&P setup including Model 3 Performance, the hub features a stepped-lip cut out. This center bore is compatible with ALL variants of Model 3 & Model Y.
Paintless knurled bead seating to prevent tires from slipping while driving hard at the track.
19.2lbs is the final weigh-in for 19x9.5 +29 spec. Currently the lightest 19x9.5 direct bolt-on wheel you can purchase for your Model 3 or Model Y!
Presented here in Brushed Clear color finish.
Profile 2 in APEX lingo means plenty aggressive!
Weight cutting measures can be found in between spokes!
The hub-pockets are drilled deep to reduce weight also. And of course, to make this a true P&P setup including Model 3 Performance, the hub features a stepped-lip cut out. This center bore is compatible with ALL variants of Model 3 & Model Y.
Paintless knurled bead seating to prevent tires from slipping while driving hard at the track.
19.2lbs is the final weigh-in for 19x9.5 +29 spec. Currently the lightest 19x9.5 direct bolt-on wheel you can purchase for your Model 3 or Model Y!